FEATURES
- Remote-controllable sixteen-channel stereo digital mixer
- Channel volume and pan control with LED readout
- Dedicated Recall, Group, Solo, and Mute buttons
- Sixteen user Preset memory locations
- Front-panel headphone jack
- Master Volume, Treble, and Bass controls
- Balanced XLR and ¼” TRS outputs
- Balanced ¼” TRS inserts
- Auxiliary stereo mix in
- Sixteen channel select buttons with dual LEDs
- MIDI control over mix and preset save/recall
In commercial environments, the A-16R can be effectively used in applications ranging from conferencing to room combining to simple mixing in a gymnasium or auditorium.
The A-16R provides intuitive control over volume and pan for 16 channels, as well as master volume and tone. Each A-16R can store up to sixteen preset mixes, with three subgroups per Preset. Individual channels, channel pairs, or groups can be soloed or muted.
The A-16R can be controlled remotely from the optional A-16CS Control Surface or by select third-party controllers and touch panels. Remote control allows the A-16R to be placed in an equipment rack with other gear, such as amps or transmitters, while still allowing a user to control the mix. The A-16CS is connected to the A-16R with a single Cat-5e cable, up to 200ft (60m).
The A-16R provides balanced line-level outputs on XLR or ¼" TRS jacks. Insert send and return points are provided via balanced ¼" TRS jacks. MIDI In, Out, and Thru jacks provide the ability to save/load settings or select A-16R presets via MIDI. An auxiliary stereo mix input supports input of local audio such as a click track.
Audio is provided to the A-16R on a Cat-5e cable via Aviom's ultra-fast Pro16(tm) A-Net® protocol. Pro16 A-Net supports plug-and-play set-up, long cable runs (up to 500ft/150m between devices), and 24-bit uncompressed digital audio. Mixers can be connected in series or in parallel, using the A-16D or A-16D Pro A-Net Distributor. Power can be supplied locally with an external DC power supply or remotely, over the Cat-5e cable, using an A-Net Distributor.
The A-16R Personal Mixer can be used in virtually any combination with other Pro16 devices. There is no limit to the number of Personal Mixers that can be used in a system.
SPECIFICATIONS
| Audio Outputs: |
Impedence matched output |
| Headphone Output: |
Front panel; TRS; Tip: Audio Left;
Ring: Audio Right; Sleeve: Ground |
| Mix input, stereo: |
Balanced 1/4' TRS; front-panel volume control |
| Insert send/return: |
Balanced 1/4" TRS |
| A-Net I/O: |
1 A-Net In, 1 A-Net Out; RJ45 connectors |
| D/A Conversion: |
44./48kHz, 24 bit |
| Indicators: |
Pan: 5 LEDs, 4 red, 1 green;
Channel Volume: 12 red LEDs |
| Stereo Operation: |
Stereo Link, per channel pair; set at the input module
Variable pan/spread per channel or channel pair |
| Tone Controls: |
Treble: ±12dB at 9kHz shelving
Bass: ±12dB at 160Hz shelving |
| Output Impedance: |
140 ohms |
| Freq. Response: |
4Hz-22kHz +0.2dB/-3dB |
| THD +N: |
<0.003% |
| Signal to Noise (unweighted): |
-90dB typical, A/D to D/A
Measured from AN-16/i to A-16II |
| Crosstalk: |
-90dB |
| Latency: |
0.880 msec (measured from analog input to analog output) |
| A-Net Pro16: |
uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m) between device |
| Remote Control: |
A-16CS: A-Control, RJ45 jack, max. 200 ft (60m)
Compatible with select third-party controllers |
Power Supply:
Input Voltage
Output Voltage
Plug Size |
External, DC, universal switching type
100-240 volts, 50/60Hz, 30VA
18-24 VDC, 0.5 amp
2 mm |
| Dimensions: |
19" (482.6 mm) x 6.7" (170.2 mm) , 1U high |
| Weight: |
3.4 lbs (1.54 kilo) |
| Options: |
A-16CS Control Surface
MT-1 Mic Stand Bracket (for A-16CS)
EB-1 Extension Bracket |
ADDITIONAL DOCUMENTS:
User Guide
Data Sheet
|
;){kind=link}