FEATURES
- 16-channel stereo mixer
- Fully adjustable pan per channel
- Line/Headphone audio output
- Auto-detect mono/stereo circuitry
- Simple set-up with Cat-5e cables
- Sixteen Preset locations for storing custom mixes
- Channels can be soloed, muted, or grouped
- Global trim for reducing all channel volumes
- Sixteen channel select buttons with dual LEDs
- Pan/Spread control with LED readout
- Channel volume control with LED level readout
- Master Volume, Treble, and Bass controls
- Mounts easily on a mic stand with the optional MT-1 mic stand mount
The stereo output from the A-16II can be used to drive wired or wireless in-ears, headphones, powered floor wedges, an amplifier, or spot monitors.
The A-16II Personal Mixer is fully compatible with all Pro16 Series products, including Aviom's digital interface cards for Yamaha® and DiGiCo® digital mixing consoles. As with all Pro16 Series products, Cat-5e cable runs of up to 500 feet (150 meters) are possible between devices.
Mixers can be daisy-chained or connected in parallel using an A-Net Distributor. Parallel connections also allow power to be supplied to the mixers over the Cat-5e cable.
SAMPLE SYSTEM DESIGN
Sixteen channels of audio are drawn from the console and patched to an AN-16/i Input Module, which converts the audio to digital. The digital audio is output as A-Net, to an A-16D A-Net Distributor on stage. Requiring power for each line, the A-16D supplies audio and power to the four A-16II Personal Mixers. Performers can monitor with headphones, IEMs, or wedges. Up to four additional Personal Mixers can be connected directly to this distributor. Below is a sample system layout of the Aviom Personal Mixer Bundle (A-16D) system:
SPECIFICATIONS
| A-Net Input/ Output: |
1 input, 1 output Category 5 (RJ45 connector) |
| Digital to Analog Conversion Bit Depth: |
24 bit |
| Signal to Noise Ratio: |
(Referenced to 0dB) -103dB |
| Tone Controls: |
Treble +/-12dB at 9kHz shelving |
| Bass +/-12dB at 160Hz shelving |
| Maximum Levels (RMS): |
Line/Headphone outs: 1.0 watt at 100 ohms |
| Impedance: |
Line/Headphone outs: 32 ohms |
| Dimensions: |
10.75" wide x 5.6" deep 2.25" high |
| Weight: |
3.4 lbs. |
| Options: |
MT-1 Mic Stand Mount |
| EB-1 Extension Bracket |
ADDITIONAL DOCUMENTS:
User Guide
Data Sheet
|
;){kind=link}